Cara Konfigurasi Routing RIP Cisco Packet Tracer

Cara Konfigurasi Routing RIP Cisco Packet Tracer

HobbyTekno - Pada postingan kali ini Admin akan membahas cara Konfigurasi Routing RIP Pada Cisco Packet Tracer. Routing Information Protocol adalah Routing dinamis yang biasa digunakan pada Jaringan LAN maupun WAN karena itu RIP termasuk dalam Interior Gateway Protocol (IGP).
Langsung saja simak konfigurasinya.

Topologi Routing RIP Cisco Packet Tracer


Sebelum memulai Konfigurasi, berikut adalah topologi yang akan digunakan.


Langkah-Langkah Routing RIP Cisco Packet Tracer


1. Nyalakan Interface pada kedua Router
RTR-A(config)#int gig0/0
RTR-A(config-if)#no sh
RTR-A(config-if)#int gig0/1
RTR-A(config-if)#no sh
RTR-B(config)#int gig0/0
RTR-B(config-if)#no sh
RTR-B(config-if)#int gig0/1
RTR-B(config-if)#no sh

2. Konfigurasi IP Address sesuai Topologi
RTR-A(config)#int gig0/0
RTR-A(config-if)#ip add 192.168.1.1 255.255.255.0
RTR-A(config)#int gig0/1
RTR-A(config-if)#ip add 10.10.10.1 255.255.255.252
RTR-B(config)#int gig0/0
RTR-B(config-if)#ip add 192.168.2.1 255.255.255.0
RTR-B(config)#int gig0/1
RTR-B(config-if)#ip add 10.10.10.2 255.255.255.252
CLNT1 - IP Configuration
IP Address : 192.168.1.2
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.1.1
CLNT2 - IP Configuration
IP Address : 192.168.1.3
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.1.1
CLNT3 - IP Configuration
IP Address : 192.168.2.2
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.2.1
CLNT4 - IP Configuration
IP Address : 192.168.2.3
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.2.1

3. Konfigurasi RIP Pada kedua Router.
RTR-A(config)#router rip
RTR-A(config-router)#net 192.168.1.0
RTR-A(config-router)#net 10.10.10.0
RTR-B(config)#router rip
RTR-B(config-router)#net 192.168.2.0
RTR-B(config-router)#net 10.10.10.0


4. Lakukan Pengecekan dengan cara PING dari CLNT1 ke CLNT3 dan CLNT2 ke CLNT4
CLNT1 ke CLNT3 - Packet Tracer PC Command Line 1.0
C:\>ping 192.168.2.2
Pinging 192.168.2.2 with 32 bytes of data:
Reply from 192.168.2.2: bytes=32 time<1ms TTL=254
Reply from 192.168.2.2: bytes=32 time<1ms TTL=254
Reply from 192.168.2.2: bytes=32 time<1ms TTL=254
Reply from 192.168.2.2: bytes=32 time<1ms TTL=254
Ping statistics for 192.168.2.2:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
CLNT2 ke CLNT4 - Packet Tracer PC Command Line 1.0
C:\>ping 192.168.2.3
Pinging 192.168.2.3 with 32 bytes of data:
Reply from 192.168.2.3: bytes=32 time<1ms TTL=254
Reply from 192.168.2.3: bytes=32 time<1ms TTL=254
Reply from 192.168.2.3: bytes=32 time<1ms TTL=254
Reply from 192.168.2.3: bytes=32 time<1ms TTL=254
Ping statistics for 192.168.2.3:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms 

Sekian Cara Konfigurasi Routing RIP Cisco Packet Tracer, semoga postingan Admin kali ini bermanfaat untuk anda. Jika ada kendala tanyakan saja pada komentar.

No comments for "Cara Konfigurasi Routing RIP Cisco Packet Tracer"